Sound Cross

Descriptions

SoundCross -M consists of a few modules and uses the ap-x algorithm. It transmits hight-qualit audio signals from a studio, and they are used for outdoor broadcasting and relay broadcating connectrd to each broadcasting station. It is a digital/analog multi-channel audio codec device which is connected to the 10 circuits of stereo digital audio signals of analog audio, signals condenses them into digital signals, and transmits the digital signals to a long-distance emitting device, nad vice versa. It is used for mono or stroreo of FM broadcasting, HD radio and DAB.

Features

• The bandWidth of its audio signals supports from 10Hz to 22.5kHz
• It Uses two E1s.
• The power unit and the truck unit are duplicated.
• It uses the analog signal or the AES/EBU signal, selecityely.
• Event function can be set up using the front panel.
• It can control or monitor a few devices using the ethernet port.
• It has a function of Fan ON,OFF.
• It can control the volume of the headphones.
• It has a function of test-tone emission.
• It has a function of TPG emission
• It has function of Audio and Network loop test.
• It has a function of gennerating audible signals